Fire alarm installers in Ashford, Kent

Ashford is around 20 minutes from our Folkestone base along the M20. Nova Security Systems designs, installs and maintains fire alarm systems across the town and the borough, from the business parks and new homes to Tenterden and the villages, and we’re BAFE SP203-1 registered (No. 303674) for all four modules.

Illustration: a single-storey floor plan with a detector and a sounder in every room, a manual call point at each of the three final exits, the control panel by the main entrance, and the fire alarm operating: first the kitchen heat detector, then the corridor smoke detector EXITEXITEXIT OfficeOfficeKitchenStore ReceptionMeetingPlantCorridor CIE 1 2 1Fire: kitchen heat detector 2Spreading: corridor Smoke detector HHeat detector Call point Sounder EXITFinal exit CIE = control panel
BAFE SP203-1
Registered No. 303674
Modules
Design, Installation, Commission, Maintenance
Certification body
NSI (Fire Silver)
Designed to
BS 5839-1:2025
Google reviews
120+ five-star

Fire alarms for a growing town

Ashford has grown fast: the borough’s population rose by 12.5% between 2011 and 2021, to 132,700, well above the 7.5% for the South East and 6.6% for England. Its business parks and industrial estates have grown with it, from Orbital Park at junction 10 of the M20 and Waterbrook Park at junction 10a to Eureka Business Park at junction 9, and the Cobbs Wood and Henwood industrial estates in town. New units and fit-outs need fire alarms designed to BS 5839-1:2025 from the start, and a change of use needs the existing system checked and, often, extended.

For a commercial woodwork workshop in Ashford, we installed a conventional fire alarm with Apollo Series 65 detectors. Read the case study.

Also at junction 10a, the Sevington inland border facility covers 93 hectares, with a border control post that runs around the clock. Warehouses and logistics sites that work through the night need a system that pinpoints the device that has operated, and signalling to an alarm receiving centre, so a fire is acted on even when the office is empty.

Housing is growing too: Chilmington Green is planned for up to 5,750 homes, and Finberry for 1,100. Landlords letting houses, flats and HMOs need fire alarms to BS 5839-6. Ashford Borough Council runs mandatory HMO licensing only, for HMOs with five or more people in two or more households, and every licensed HMO must have a fire risk assessment. Fire alarms for HMOs.

Out in the borough there are 43 conservation areas, including Tenterden, Wye and Charing, where listed buildings and old farmhouses make wireless fire alarms the sensible choice: no chasing old walls, and far fewer fixings.

Kent Fire and Rescue Service’s 2026 resource review notes that Ashford’s count of very high-risk premises, 120, is the highest in the county. Its policy on automatic fire alarms applies here as everywhere in Kent: for most premises, crews are sent once a fire is confirmed.

Buildings we look after in Ashford

  • Warehouses, logistics sites and industrial units on Ashford’s business parks
  • Offices and commercial fit-outs
  • Shops, restaurants and leisure in the town centre
  • Landlords’ houses, flats and HMOs
  • Listed buildings, farms and rural businesses around Tenterden, Wye and Charing
  • Schools and care homes

Kent Fire and Rescue usually needs a fire confirmed first

For most premises, callers must confirm a fire, or signs of fire, before crews are sent to an automatic fire alarm, day and night. Your fire procedure needs to say who checks and who calls 999.

What the policy means for you

Security systems in Ashford

CCTV, alarms, access control, door entry, gates and barriers: security system installers in Ashford.

An Apollo Series 65 heat detector on the profiled metal ceiling of the workshop
An Apollo Series 65 heat detector we fitted at a woodwork workshop in Ashford.

Fire alarm prices in Ashford

Every building is different, so we survey first and give you a clear, fixed price. As a guide, these are our starting prices, the same across Kent.

All our prices

Starting prices

Fire alarm for a small office
from £3,500 + VAT (£4,200 inc. VAT)
Wireless Ajax fire alarm for an HMO with three flats
from £3,500 + VAT (£4,200 inc. VAT)
Fire alarm maintenance contract
from £120 + VAT per visit (£144 inc. VAT)

Every job gets a clear, fixed price after a free site survey.

Book a free survey

All our prices

What our customers say

We have 120+ five-star Google reviews across all our work. A few longer testimonials are below, each labelled with the job it’s about; read all our reviews on Google.

“From planning to completion, Nova Security have been a delight to work with. The team consisting of Georgie, Ricky and Alex have helped make this complex project seem extremely simple with their extensive knowledge and experience. The underground automation aspect of the project was a huge concern for me, but with Nova Security in tow, the project went extremely well with no issues.”

Carl Graham, Estates Manager, Port Lympne Wild Life Reserve
About: gate automation

“Fantastic job! Was given their number by a friend after being let down by so many other companies. Wanted the alarm renewed before Christmas, Ricky managed to fit us in and fit a new system within 2 weeks of us phoning him. Very tidy workers, did exactly as we asked and added their own input into the alarm system to upgrade it.”

Steve Faulkner, Director, Faulkner Plant Services
About: intruder alarm

“I would absolutely recommend Nova Security for a small business such as ourselves. Fantastic on service, advice, professionalism and really good value for money on what they provide and the individual packages they offer.”

Tom Lundie, Mr Whippets Cafe
About: small business security

Fire alarm questions from Ashford

How much does a fire alarm cost in Ashford?

Our starting prices are the same across Kent: a fire alarm for a small office costs from £3,500 + VAT (£4,200 inc. VAT), a wireless Ajax fire alarm for an HMO with three flats from £3,500 + VAT (£4,200 inc. VAT), and servicing from £120 + VAT per visit (£144 inc. VAT). The price for your building depends on its size, the category your fire risk assessment calls for, the type of system and the cable routes, so we survey first, free, and give you a clear, fixed price. All our prices.

Do I need an electrician to fit a fire alarm?

Not necessarily, but whoever designs, installs and commissions it must be competent. Government fire safety guidance says new automatic fire detection systems should be designed and installed by a competent person, with further guidance in BS 5839-1, and that servicing is normally done by a specialist fire alarm company. The simplest check is third-party certification: BAFE SP203-1 registration shows which of design, installation, commissioning and maintenance a company is certificated for, and we hold all four. An electrician can run the cables to our design, and we commission and certify the system.

Does Ashford Borough Council license HMOs?

Yes, through mandatory licensing only: HMOs with five or more people forming two or more households need a licence, and every licensed HMO must have a fire risk assessment. There’s no additional licensing scheme for smaller HMOs, but they still need fire precautions suited to the building, usually including a fire alarm to BS 5839-6. Fire alarms for HMOs.

Have you installed fire alarms in Ashford?

Yes, including a conventional fire alarm with Apollo Series 65 detectors for a commercial woodwork workshop. Read the case study.

Do you work on new builds and fit-outs in Ashford?

Yes. We work with main contractors and electricians from design stage, and certify each stage: design, installation, commissioning and handover.

Do you cover Tenterden and the villages?

Yes, including Wye, Charing, Hamstreet and the rest of Ashford borough.

We’ve changed how our unit is used. Does the fire alarm need changing?

Possibly. A change of use should prompt a review of your fire risk assessment, which may change the category of fire alarm you need. We can check your system against the new requirements and quote for any changes.

Are you BAFE registered for fire alarm work in Ashford?

Yes. Nova Security Systems is BAFE SP203-1 Registered Organisation No. 303674 for Design, Installation, Commissioning/Handover and Maintenance, third-party certificated by NSI. The registration covers our work wherever we are, including Ashford.

Can you take over our existing fire alarm?

Yes. We take over most makes of system that are still serviceable, starting with a full inspection. We rebuild missing records such as the zone plan and logbook, and can transfer your monitoring contract.

Book a free fire alarm survey in Ashford

Tell us a little about the building and we’ll call you back within one working day. Prefer to talk? Call 01303 720282.

We use these details to reply to you. See our privacy notice.

Or talk to us

Call the office and you’ll speak to someone who knows fire alarms. We’re at Shearway Business Park in Folkestone.