CCTV storage calculator

How much hard drive space do your CCTV cameras need, and how many days will it record? Enter your cameras, resolution, codec (H.264, H.264+, H.265 or H.265+) and how long you want to keep footage, and we’ll work out the storage, the bandwidth and the hard drives to fit, from 1 TB to 12 TB.

CCTV storage calculator

Camera group 1
Leave blank and we’ll estimate it

For a mix of cameras, such as 4 × 4 MP and 2 × 8 MP

hours
24 for continuous recording. For motion-only, estimate the hours of activity.
days
Many businesses keep around 30 days
Shown on the PDF
Shown on the PDF

How it’s calculated

Storage a day = bitrate × 1,000 ÷ 8 × 3,600 × hours recorded

  • Bitrate: how much data each camera sends every second, in kilobits per second (kbps). Resolution, codec, frame rate and movement all change it.
  • Hours recorded: 24 for continuous recording, fewer for motion-only.
  • Days: storage a day, for every camera, multiplied by the days you want to keep.
  • 5% reserved on each drive for the recorder’s file system and indexes.

Worked example

Four 4 MP cameras on H.265 at 25 fps, medium movement: about 3.2 Mbps each, or 34.5 GB a day each. Four cameras: 138 GB a day. For 30 days: 4.14 TB, so a 6 TB drive with room to spare.

Switch the same cameras to H.265+ and a 4 TB drive holds about 47 days.

How many days will a hard drive record?

Typical days of continuous recording on 1 TB to 12 TB drives, worked out with the same calculator. Your cameras may differ: use the calculator for your own system.

Approximate days of continuous recording, 25 fps, medium movement
Hard drive4 × 4 MP, H.2644 × 4 MP, H.2654 × 4 MP, H.265+8 × 4 MP, H.265+8 × 8 MP, H.265+
1 TB3 days6 days11 days5 days2 days
2 TB7 days13 days23 days11 days5 days
3 TB10 days20 days35 days17 days8 days
4 TB14 days27 days47 days23 days11 days
6 TB21 days41 days71 days35 days17 days
8 TB28 days55 days95 days47 days23 days
10 TB35 days68 days119 days59 days29 days
12 TB42 days82 days143 days71 days35 days

H.264 vs H.264+ vs H.265 vs H.265+

The codec is the biggest single choice affecting storage. The same camera can need a quarter of the space just by changing it.

One 4 MP camera at 25 fps, medium movement, recording 24 hours a day
CodecWhat it isTypical bitrateStorage a day
H.264The long-standing standard, supported by everything6.1 Mbps66 GB
H.264+H.264 with smart encoding: the still background is sent less often3.7 Mbps40 GB
H.265High Efficiency Video Coding: roughly half the size of H.264 for the same picture3.2 Mbps35 GB
H.265+H.265 with smart encoding: the smallest files, especially on quiet scenes1.8 Mbps20 GB
  • Use H.265 or H.265+ where you can. Nearly every camera and recorder we install supports them, and they cut storage and network traffic dramatically.
  • Smart codecs (the “+” versions) save most on quiet scenes. A camera watching a busy road saves far less than one watching an empty car park at night.
  • Check compatibility. Some older recorders, apps and video management software can’t play H.265, so H.264 is still sometimes the right answer.

Our assumptions

  • Typical H.264 bitrates at 25 fps, medium movement: 2 MP (1080p) 4 Mbps, 4 MP (1440p) 6 Mbps, 5 MP 7 Mbps, 6 MP 8 Mbps, 8 MP (4K) 12 Mbps, 12 MP 16 Mbps.
  • H.265: about 52% of the H.264 bitrate, based on Hikvision’s tests, which averaged a 47.8% saving.
  • H.265+ and H.264+: our cautious estimates: 30% and 60% of the H.264 bitrate at medium movement, saving more on quiet scenes and less on busy ones.
  • Movement: low activity uses about 70% of the medium bitrate, high activity about 140%.
  • Frame rate: bitrate doesn’t halve when the frame rate halves, because keyframes still need sending, so we scale 75% of it with the frame rate.
  • Drives: 1, 2, 3, 4, 6, 8, 10 and 12 TB, in recorders with 1, 2, 4 or 8 bays, with 5% of each drive kept free.

Real bitrates vary with the camera, its settings, lighting and the scene, especially at night when image noise adds data. For the most accurate answer, enter the bitrate your camera is set to: it’s in the camera’s or recorder’s video settings.

Disclaimer. This calculation is an estimate for guidance only, based on the figures entered and on typical bitrates, which Nova Security Systems S.E. Ltd has not checked against your cameras. Real bitrates vary with the camera, its settings, lighting and the scene. It is not a design or professional advice. Confirm your recorder’s maximum drive size and number of bays with the manufacturer. To the fullest extent permitted by law, Nova Security Systems S.E. Ltd accepts no responsibility or liability for any loss, damage, cost or claim arising from the use of, or reliance on, this calculation. See our website terms and disclaimer.

Want it done for you? We design CCTV in NOVA System Designer and size the recorder for the retention you need. CCTV installation.

CCTV storage questions

How much storage do I need for CCTV?

It depends on the number of cameras, their resolution, the codec, the frame rate, how much movement they see and how long you keep footage. As a guide, four 4 MP cameras on H.265 at 25 fps, recording 24 hours a day, use about 138 GB a day, so 30 days needs about 4.4 TB. Use the calculator above for your system.

How many days will a 1 TB hard drive record?

For one 4 MP camera on H.265+ at 25 fps with medium movement, about 47 days of continuous recording. For four of those cameras, about 11 days. The table above shows 1 TB to 12 TB drives for common systems.

How many days will a 4 TB drive record?

With four 4 MP cameras on H.265+, about 47 days of continuous recording; on H.265, about 27 days; on H.264, about 14 days.

Is H.265 better than H.264?

For storage, yes. H.265 needs roughly half the bitrate of H.264 for the same picture; in Hikvision’s tests the average saving was 47.8%. Most modern cameras and recorders support it. H.264 is still useful where an older recorder or video management software can’t decode H.265.

What is H.265+ (and H.264+)?

They’re smart encoding modes, such as Hikvision’s H.265+ and H.264+. They record the unchanging background less often and spend the data on what moves, so they save the most on quiet scenes and the least on busy ones. Hikvision’s tests showed savings of over 80% against H.264 on quiet scenes; our calculator uses more cautious figures.

How is CCTV storage calculated?

Storage per day = bitrate (kbps) × 1,000 ÷ 8 × 3,600 × hours recorded, in bytes. Add every camera together, multiply by the days you want to keep, and leave some space for the recorder’s file system. We leave 5%.

Does motion recording save storage?

Yes, often a lot, because cameras only record when something happens. Enter the hours of activity a day instead of 24. But continuous recording means you never miss the moments before an event, and smart codecs such as H.265+ already shrink quiet periods, so many sites record continuously.

Which hard drives should I use for CCTV?

Surveillance drives, such as WD Purple or Seagate SkyHawk, which are designed to record around the clock. Desktop drives aren’t built for constant writing. Check your recorder’s maximum drive size and number of bays.

How long should CCTV footage be kept?

There’s no fixed legal period: UK data protection guidance says keep it only as long as your purpose needs. Many businesses settle on around 30 days. CCTV and data protection explained.

Does this work for Hikvision, Dahua and other brands?

Yes. H.264 and H.265 are industry standards. H.264+ and H.265+ are Hikvision’s names; other brands have their own smart codecs that work in a similar way. For the most accurate answer, enter the bitrate your camera is set to.

Want CCTV sized and installed for you?

We design, install and maintain hardwired IP CCTV across Kent and East Sussex. Call 01303 720282 or send us a message for a free survey.